You are here: Home > Load Measuring Equipment > Precision Links & Running Line Monitors
 Download Load Cell Catalogue
The system electronically monitors the load on a running line (winch, crane etc) which is displayed digitally. It will optionally monitor the length of line out and line speed (including direction) in any engineering units. It's modular design enables facilities to be added or removed as requirements change.
 Line speed monitoring. Line out metering (bi-directional).
Mains operation 220/110VAC.
PC interfacing + Data logging with additional hardware and software.
Running Line Monitor Type SWLRLM
Five-wheel construction, guides rope smoothly onto the monitoring wheel.
Rope may be fitted without tools using a gloved hand, in a few minutes.
Load pin forms shaft of centre sheave.
Strain gauges mounted in shaft bore(High impact protection, IP65 dust/water ingress protection).
Wheels mounted on roller bearings, fitted grease nipples. Heavily
galvanised frame and tie bars.
Readily interfaces with SWLPC(J) display.
Display with 24v DC lead acid
battery giving, 10 to 12 hours between charges, when line out/speed monitoring jn addition to load monitoring) required.
Battery charger included
Extension cable (plug & socket ends) 10 metres
Robust nylon reinforced plugs and sockets with locking rings.
Manufactured in capacities from 50 kgs to 5OOOkgs. Due to it's 'S' configuration this range produces exceptionally high levels of accuracy (often better than 0.1% of rated capacity). The link is non-indicating and is compatible with the type SWLPC(J) display. Suspension points are drilled and tapped to facilitate incorporation into a machine or more complex device. Alternatively it may be supplied with bow nuts fitted, or a range of hooks, clevises, links or shackles.
Alternative cable lengths.
Selection of fittings (eye nuts, hooks, swivels, clevises, links etc.).
Robust brief case type carrying case.
Type SWLZ is often used as a switching device; the measured load being used to actuate or interrupt other operation e.g. as an overload cut out or to maintain tension between defined limits.
Type SWLZ is also supplied as a 'kit' (c/w eye suspension, type SWLPC(J) display, charger and carrying case). Typical application - guy mast tensioning and monitoring.
|
